Manufacturer Part: LIS331DL
Manufacturer: STMicroelectronics
Description: Board Mount Accelerometers MEMS MOTION SENSOR 3-AXIS
Specifications
• Sensing Axis: X, Y, Z 
• Acceleration: 2 g, 8 g 
• Sensitivity: 18 mg/digit, 72 mg/digit 
• Package / Case: LGA-16 
• Output Type: Digital 
• Supply Voltage (Max): 3.6 V 
• Supply Voltage (Min): 2.16 V 
• Supply Current: 300 uA 
• Maximum Operating Temperature: + 85 C 
• Minimum Operating Temperature: - 40 C 
• Packaging: Tray 
• Digital Output - Bus Interface: I2C, SPI 
• Mounting Style: SMD/SMT
• RoHS Compliant: Yes 

Manufacturer Part: LD1117AS33TR
Manufacturer: STMicroelectronics
Specifications
• Number of Outputs: 1
• Polarity: Positive
• Input Voltage MAX: 10 V
• Output Voltage: 3.3 V
• Output Type: Fixed
• Dropout Voltage (Max): 1.1 V at 100 mA
• Output Current: 1000 mA
• Line Regulation: 6 mV / V
• Load Regulation: 10 mV
• Voltage Regulation Accuracy: 2 %
• Maximum Power Dissipation: 12 W
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Package / Case: SOT-223
• Packaging: Reel
• Minimum Operating Temperature: 0 C
• RoHS Compliant: Yes

Features

• Supply voltage: 5 VDC
• Current consumption: 15mA
• Working Frequency: 40Hz 
• Max Range: 4m 
• Min Range: 0.02m (2cm)
• MeasuringAngle: 15 degree 
• Trigger Input Signal: 10uS TTL pulse 
• Echo Output Signal: Input TTL lever signal and the range in proportion

aMG SIGCON-A is a simple general purpose op-amp breakout board. It has been designed to be highly flexible. You can create any op-amp application circuits such as inverting, non-inverting amplifier, voltage follower, LP filter, etc., by soldering some R, C or wire jumper at the specific positions using reference circuit diagrams. 

Features 
• Based on LM7321, single rail-to-rail input and output amplifiers.
• Wide operating voltage ranges 2.5V to 32V. 
• Hi output current +65 mA / –100 mA.
• Gain bandwidth product 20 MHz.
• Capacitive load tolerance unlimited.
• Input common mode voltage 0.3V beyond rails.
• Temperature range –40°C to 125°C.

Signal Conditioning Design Guideline

• Come with MAX31855KASA+ Cold-Junction Compensated Thermocouple-to-Digital Converter. 
• Work with any K type thermocouple
• Output -200°C to +1350°C in 0.25 degree resolution (14 - bits)
• SPI Interface (allowing more than one themocouple to be connected)
• 3.3VDC power supply
• Matlab / Simulink Blockset support via Waijung Blockset

Tutorials and Simulink Demo Files 

• Thai
• English

• Based on Freescale MPL3115A2
• Fully Compensated internally
• Direct Reading, Compensated 
  • Pressure: 20-bit measurement (Pascals) 
  • Altitude: 20-bit measurement (meters)
  • Temperature: 12-bit measurement (degrees Celsius)
• Programmable Events
• Autonomous Data Acquisition
• Resolution down to 1 ft. / 30 cm
• 32 Sample FIFO 
• Ability to log data up to 12 days using the FIFO 
• 1 second to 9 hour data acquisition rate
• I2C digital output interface (operates up to 400 kHz)
• Power Supply: 1.95V to 3.6V, internally regulated by LDO
• 1.6V to 3.6V Digital Interface Supply Voltage

• Based on MAX44009 Industry's Lowest-Power Ambient Light Sensor with ADC
• Wide 0.045 Lux to 188,000 Lux Range
• I2C Interface
• VCC = 1.7V to 3.6V
• ICC = 0.65µA Operating Current 
• -40°C to +85°C Temperature Range
• Device Address Options
  • 1001 010x (pre-configured)
  • 1001 011x

• Avago Technologies APDS-9301 Miniature Ambient Light Photo Sensor
• Approximate the human-eye response
• Precise Illuminance measurement under diverse lighting conditions
• Programmable Interrupt Function with User-Defined Upper and Lower Threshold Settings
• 16-Bit Digital Output in Lux with I2C Fast-Mode at 400 kHz
• 50/60-Hz Lighting Ripple Rejection
• Power Supply: 2.7 - 3.6V

• Sensor: Honeywell HIH6131-021-001
  
  • Humidity Sensing Accuracy: +/- 4% RH 
  • Compensated Humidity Range: 10 - 90 %RH
  • Compensated Temperature Sensing Accuracy: +/- 1 deg C
  • Compensated Temperature Range: 5 - 50 deg C
  • 14 bits resolution
  • Built-in Hydrophobic Filter and Condensation-Resistance
  • Industry-leading long-term stability (1.2 %RH over five years)
  • Industry-leading reliability
  • %RH level alarm outputs
• I2C Interface
• Operating Temperature: -25 °C to 85 °C
• Power Supply 2.3 - 5.5VDC