Products

FiO Mote - ST

Based on ARM Cortex-M0 STM32F072CB MCU
- 48MHz CPU Frequency Max
- 128 KB Flash
- 16 KB RAM
- 37 GPIO
- Timers: 1 Advanced, 6 General Purpose, 2 Basic
- Comms: 2 SPI, 2 I2C, 4 USART (+LIN), 1 CAN, 1 USB, 1 CEC
- 10 Channels 12-bits ADC
- 2 Channels 12-bits DAC
- 2.0 - 3.6 V
All IO pins available via pin headers upto 37 pins
Pin compatible with FiO Glide and other stackable add-on modules, for examples;
- Temperture/Humidity/Pressure/Light Sensors module
- Current sense module (to aid low power design)
- Power supply module
- Motor driver module
Onboard 8MHz crystal (for HSE clock)
SWD Debugger port available
Program via built-in STMicroelectronics' UART IAP Protocol (aMG USB Connect required for USB-to-serial conversion)
Support Automatic Compile and Download when working with Matlab & Simulink, Waijung Blockset, and STM32F0 Target

Learn More

฿450.00

Out of stock

Based on ARM Cortex-M0 nRF51422 MCU
- 16MHz CPU Frequency Max
- 256 KB Flash (without Aimagin Bootloader and S310 ANT/BLE Soft Device)
- 128 KB Flash (with Aimagin Bootloader and SoftDevice)
- 32 KB RAM
- 31 GPIO
- 2.4 GHz RF Transceiver upto 2Mbps data rates
- Timers: 1 x 32-bits, 2 x 16-bits
- Comms: SPI, I2C, USART, AES, RTC, Quadrature Decoder
- 8 Channels 10-bits ADC
- 1.8 - 3.6 V
Approximate Range (with default short antenna):
- Outdoor line-of-site: 100 m
- Indoor between different rooms with wall: 40 m
All IO pins available via pin headers upto 31 pins
Pin compatible with FiO Mote and other stackable add-on modules, for examples;
- Temperture/Humidity/Pressure/Light Sensors module
- Current sense module (to aid low power design)
- Power supply module
- Motor driver module
Onboard RTC crystal
SWD Debugger port available
Program via UART using Aimagin bootloader (aMG USB Connect required for USB-to-serial conversion)
Support Automatic Compile and Download when working with Matlab & Simulink, Waijung Blockset, and nRF51 Target
More background information

Learn More

฿1,490.00

Out of stock

Based on ARM Cortex-M4 STM32F417IG MCU
All IO pins available via pin headers upto 140 pins
Pin compatible with STM32F4DISCOVERY board
Onboard 8MHz crystal (for HSE clock)
JTAG Debugger port
Require ST-Link to program and debug
Optional External SDRAM (up to 512 kBytes)
Optional Onboard 32.768kHz crystal (for real time clock) with button (2032) battery holder

**IMPORTANT NOTE** : FiO 2 requires ST Link to program the MCU.

Tutorials:

Learn More

In stock

From: ฿1,250.00

To: ฿3,000.00