Download the above slide.

The starter pack include:

• 2x FiO Glide
• 2x aMG USB Connect
• 2x aMG Breadboard  - F
• 2x USB Cable
• 4x AA Batteries
• 1x Carrying Box
• 1x Training Manual in Thai (Free Download - 4MB) 
  • LAB 1 Install Waijung and Hardware
  • LAB 2 Simulink for beginners
  • LAB 3 Digital Input_Output
  • LAB 4 ADC and Digital Output on Charater LCD
  • LAB 5 ADC and Digital Input Tx and Display character LCD Rx using ANT Network
  • LAB 6 ADC and Digital Input Tx and Rx PC Host using ANT Network
  • LAB 7 Current Sensor
  • LAB 8 Data Logger

About FiO Glide 

• Based on ARM Cortex-M0 nRF51422 MCU
  • 16MHz CPU Frequency Max
  • 256 KB Flash (without Aimagin Bootloader and S310 ANT/BLE Soft Device)
  • 128 KB Flash (with Aimagin Bootloader and SoftDevice)
  • 32 KB RAM
  • 31 GPIO
  • 2.4 GHz RF Transceiver upto 2Mbps data rates
  • Timers: 1 x 32-bits, 2 x 16-bits
  • Comms: SPI, I2C, USART, AES, RTC, Quadrature Decoder
  • 8 Channels 10-bits ADC 
  • 1.8 - 3.6 V
• Approximate Range (with default short antenna):
  
  • Outdoor line-of-site: 100 m
  • Indoor between different rooms with wall: 40 m
• All IO pins available via pin headers upto 31 pin
• Pin compatible with FiO Mote and other stackable add-on modules, for examples;
  • Temperture/Humidity/Pressure/Light Sensors module
  • Current sense module (to aid low power design)
  • Power supply module
  • Motor driver module
• Onboard RTC crystal
• SWD Debugger port available
• Program via UART using Aimagin bootloader (aMG USB Connect required for USB-to-serial conversion)
• Support Automatic Compile and Download when working with Matlab & Simulink, Waijung Blockset, and nRF51 Target
• More background information

 



Supported Matlab / Simulink Software (Waijung Blockset)

 

• Based on ARM Cortex-M0 STM32F072CB MCU
  • 48MHz CPU Frequency Max
  • 128 KB Flash
  • 16 KB RAM
  • 37 GPIO
  • Timers: 1 Advanced, 6 General Purpose, 2 Basic
  • Comms: 2 SPI, 2 I2C, 4 USART (+LIN), 1 CAN, 1 USB, 1 CEC
  • 10 Channels 12-bits ADC 
  • 2 Channels 12-bits DAC 
  • 2.0 - 3.6 V
• All IO pins available via pin headers upto 37 pins
• Pin compatible with FiO Glide and other stackable add-on modules, for examples;
  • Temperture/Humidity/Pressure/Light Sensors module
  • Current sense module (to aid low power design)
  • Power supply module
  • Motor driver module
• Onboard 8MHz crystal (for HSE clock)
• SWD Debugger port available
• Program via built-in STMicroelectronics' UART IAP Protocol (aMG USB Connect required for USB-to-serial conversion)
• Support Automatic Compile and Download when working with Matlab & Simulink, Waijung Blockset, and STM32F0 Target

 



Supported Matlab / Simulink Software (Waijung Blockset)

The starter pack include:

• 1x FiO Mote - ST
• 1x aMG USB Connect
• 1x aMG PWS 3V3/5V v2
• 1x USB Cable

About FiO Mote - ST

• Based on ARM Cortex-M0 STM32F072CB MCU
  • 48MHz CPU Frequency Max
  • 128 KB Flash
  • 16 KB RAM
  • 37 GPIO
  • Timers: 1 Advanced, 6 General Purpose, 2 Basic
  • Comms: 2 SPI, 2 I2C, 4 USART (+LIN), 1 CAN, 1 USB, 1 CEC
  • 10 Channels 12-bits ADC 
  • 2 Channels 12-bits DAC 
  • 2.0 - 3.6 V
• All IO pins available via pin headers upto 37 pins
• Pin compatible with FiO Glide and other stackable add-on modules, for examples;
  • Temperture/Humidity/Pressure/Light Sensors module
  • Current sense module (to aid low power design)
  • Power supply module
  • Motor driver module
• Onboard 8MHz crystal (for HSE clock)
• SWD Debugger port available
• Program via built-in STMicroelectronics' UART IAP Protocol (aMG USB Connect required for USB-to-serial conversion)
• Support Automatic Compile and Download when working with Matlab & Simulink, Waijung Blockset, and STM32F0 Target

 



Supported Matlab / Simulink Software (Waijung Blockset)

Features

• Supply voltage: 5 VDC
• Current consumption: 15mA
• Working Frequency: 40Hz 
• Max Range: 4m 
• Min Range: 0.02m (2cm)
• MeasuringAngle: 15 degree 
• Trigger Input Signal: 10uS TTL pulse 
• Echo Output Signal: Input TTL lever signal and the range in proportion

• Standardized: complies with SD card specification standards
• Interoperable with SD slot via SD adapter
• Dimensions: .43" x .59" x .039" (11mm x 15mm x 1mm)
• Operating Temperature: -13? F to 185? F (-25? C to 85 ? C)
• Storage Temperature: -40? F to 185? F (-40? C to 85? C)
• Weight: 0.05 oz (1.4g)
• Ultra-Portable: extremely small footprint design
• Guaranteed: lifetime warranty.

* Please note: Some of the listed capacity is used for formatting and other functions and thus is not available for data storage. Some devices may not support all of the options listed. Always consult your owner's manual for supported configurations.

Manufacturer Part: LD1117AS33TR
Manufacturer: STMicroelectronics
Specifications
• Number of Outputs: 1
• Polarity: Positive
• Input Voltage MAX: 10 V
• Output Voltage: 3.3 V
• Output Type: Fixed
• Dropout Voltage (Max): 1.1 V at 100 mA
• Output Current: 1000 mA
• Line Regulation: 6 mV / V
• Load Regulation: 10 mV
• Voltage Regulation Accuracy: 2 %
• Maximum Power Dissipation: 12 W
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Package / Case: SOT-223
• Packaging: Reel
• Minimum Operating Temperature: 0 C
• RoHS Compliant: Yes

Manufacturer Part: LIS331DL
Manufacturer: STMicroelectronics
Description: Board Mount Accelerometers MEMS MOTION SENSOR 3-AXIS
Specifications
• Sensing Axis: X, Y, Z 
• Acceleration: 2 g, 8 g 
• Sensitivity: 18 mg/digit, 72 mg/digit 
• Package / Case: LGA-16 
• Output Type: Digital 
• Supply Voltage (Max): 3.6 V 
• Supply Voltage (Min): 2.16 V 
• Supply Current: 300 uA 
• Maximum Operating Temperature: + 85 C 
• Minimum Operating Temperature: - 40 C 
• Packaging: Tray 
• Digital Output - Bus Interface: I2C, SPI 
• Mounting Style: SMD/SMT
• RoHS Compliant: Yes 

Manufacturer Part: LIS344ALH
Manufacturer: STMicroelectronics
Description: Board Mount Accelerometers MEMS Inertial High Pef 3-Axis
Specifications
• Sensing Axis: X, Y, Z 
• Acceleration: 2 g, 6 g 
• Sensitivity: 500 mV/g, 15000 mV/g 
• Package / Case: LGA-16 
• Output Type: Analog - Voltage 
• Supply Voltage (Max): 3.6 V 
• Supply Voltage (Min): 2.4 V 
• Supply Current: 680 uA 
• Maximum Operating Temperature: + 85 C 
• Minimum Operating Temperature: - 40 C 
• Packaging: Tray 
• Shutdown: Yes
• RoHS Compliant: Yes

Specifications
• Capacity: 1000mAh
• Voltage: 2S1P (7.4v) 2 cell
• Discharge Rate: 20C
• Size: 66x35x10mm 
• Charge Plug: JST-XH