• Based on FT231XS-R Full Speed (12 Mbits/sec) USB-UART Converter
• Enable Automatic Compile and Download (flash programming) when working with Matlab & Simulink, Waijung Blockset, and STM32F0 Target
• Enable Hardware-in-the-Loop Test
• Stackable with FiO Glide and FiO Mote series
• More background information

Features

• Pack of 6 Test Leads
• MJ-033 Test clips on both ends 
• One lead of each color (red, black, white, green, blue, yellow) 
  

aMG Test Clips

• Maximum Allowable Current : 0.3 A 50 VAC
• Insulation Resistance: DC 500V 100MOhm (Min)
• Breakdown Voltage AC : 500V1 Minute
• Material : ABS Resin

Test Leads

• 1-ft long UL 1007 Wire Rating: UL 1007 80C 300V
• Conductor: AWG-22 Tinned stranded copper No./mm. 17/0.16 Resistance 16.70 Ohm/ft at 20C Passes UL VW-1 &CSA FT1 flame test
• Isolation :  PVC/LF thickness 0.38 mm.
• Overall diameter : 1.6mm. Approx

aMG Test Clips
• Maximum Allowable Current: 0.3A 50VAC
• Insulation Resistance: DC 500V 100MOhm (Min)
• Breakdown VoltageAC: 500V 1 Minute
• Material: ABS Resin

Test Leads
• 1-ft long UL1007 Wire Rating: UL1007 80C 300V.
• Conductor: AWG-22 Tinned stranded copper.
   : No./mm. 17/0.16 : Resistance 16.70 Ohm/ft at 20C Passes UL VW-1 & CSA FT1 flame test.
• Resistance to acids, oils, alkalines, moisture and fungus.
• solation: PVC / LF thickness 0.38mm.
• Overall diameter: 1.6mm. Approx.

• Maximum Allowable Current: 0.3A 50VAC
• Insulation Resistance:DC 500V 100MOhm (Min)
• Breakdown VoltageAC: AC 500V 1 Minute
• Material: ABS Resin

Test Clips
• Test Clips Maximum Allowable Current: 1A 125VAC
• Insulation Resistance: DC 500V 100MOhm (Min)
• Breakdown VoltageAC: AC 1500V 1 Minute
• Material: ABS Resin

Test Clips
• Maximum Allowable Current: 1A 125VAC
• Insulation Resistance: DC 500V 100MOhm (Min)
• Breakdown VoltageAC: AC 1500V 1 Minute
• Material: ABS Resin

Test Clips
• Maximum Allowable Current: 1A 125VAC
• Insulation Resistance: DC 500V 100MOhm (Min)
• Breakdown VoltageAC: AC 1500V 1 Minute

aMG Temperature Chamber Plant model for learning Fuzzy Logic Controller

Features

• Heatting element: 1 x Halogen Lamp
• Cooling element: 2 x DC Fans
• Temperature Sensor: 1 x Analog IC
• Drive: PWM signals
• ON/OFF Switch for each actuator

Topics covered in the LAB

• Rapid Prototyping and Model-Based Design Basics
  • FiO Boards
  • RapidSTM32 / Waijung Blockset
• System Model Identification
• Fuzzy Logic Tuning
• Stand - Alone System Design