• Generic USB peripheral isolation.
• Hardware-in-the-Loop isolation when used together with RapidSTM32 Blockset and FiO evaluation boards.

• Tolerance 1%
• Power Rating 0.25 Watts
• Terminal Stye Axial

• Dimension 23.5cm x 13.5cm x 9.6cm

Features
• 5V Power Supply
• LED Backlight Yellow-Green
• STN Positive Yellow-Green
• Transflective
• HD44780 Compatible Controller
• 2 optinals :
- 16 characters 4 lines
- 16 characters 2 lines

• 3 lines 16 characters (EA DOGM163W-A and EA LED55x31A) with 3.65 mm. font, black characters on amber backlight ( EA-DOGM Series http://www.lcd-module.com/products/dog.html)
• 3.3-5V character LCD module
• RoHS compliant.

Features: 
• Cabinet made of the ABS (Acrylonitrile Butadiene Styrene) with PC (Polycarbonate) transparent cover.
• Fully Corrosion protection :
- resist in severe weather condition exposure
- impervious to dust and moisture
• Proof of standard mechanical properties and thermal properties.
• Inflammability comply with DIN 4102 part B2.

• Based on ARM Cortex-M4 STM32F417IG MCU
• All IO pins available via pin headers upto 140 pins
• Pin compatible with STM32F4DISCOVERY board
• Onboard 8MHz crystal (for HSE clock)
• JTAG Debugger port
• Require ST-Link to program and debug
• Optional External SDRAM (up to 512 kBytes)
• Optional Onboard 32.768kHz crystal (for real time clock) with button (2032) battery holder

**IMPORTANT NOTE**  : FiO 2 requires ST Link to program the MCU.

Supported Matlab / Simulink Software (Waijung Blockset)

Tutorials:

• FiO2 and aMG Labkit – Blinky demo
• Other tutorials

ตัวอย่างเนื้อหาใน CD

• Based on ARM Cortex-M0 nRF51422 MCU
  • 16MHz CPU Frequency Max
  • 256 KB Flash (without Aimagin Bootloader and S310 ANT/BLE Soft Device)
  • 128 KB Flash (with Aimagin Bootloader and SoftDevice)
  • 32 KB RAM
  • 31 GPIO
  • 2.4 GHz RF Transceiver upto 2Mbps data rates
  • Timers: 1 x 32-bits, 2 x 16-bits
  • Comms: SPI, I2C, USART, AES, RTC, Quadrature Decoder
  • 8 Channels 10-bits ADC 
  • 1.8 - 3.6 V
• Approximate Range (with default short antenna):
  • Outdoor line-of-site: 100 m
  • Indoor between different rooms with wall: 40 m
• All IO pins available via pin headers upto 31 pins
• Pin compatible with FiO Mote and other stackable add-on modules, for examples;
  • Temperture/Humidity/Pressure/Light Sensors module
  • Current sense module (to aid low power design)
  • Power supply module
  • Motor driver module
• Onboard RTC crystal
• SWD Debugger port available
• Program via UART using Aimagin bootloader (aMG USB Connect required for USB-to-serial conversion)
• Support Automatic Compile and Download when working with Matlab & Simulink, Waijung Blockset, and nRF51 Target
• More background information

 



Supported Matlab / Simulink Software (Waijung Blockset)