Specifications

• Voltage: 5 V DC
• No-load pull into the frequency: > 600 Hz
• Phase: 4
• No-load pull-out frequency: >1000 Hz
• Reduction ratio: 1/64
• Pull-in torque: >34.3 mN.m(120Hz)
• Step Angle: 5.625° / 64
• Self-positioning torque: >34.3mN.m
• DCR: 200 Ω ±7 % (25°c)
• Temperature: <40 K (120Hz)
• Insulation resistance: >10 MΩ (500V)
• Noise:  <40 dB (120Hz, No load,10cm)
• Dielectric Strength: 600 VAC/ 1mA/ 1s
• Weight: 32 g
• Insulation Class: A

• Material: Machined Steel
• Surface: gloss zinc-plated

• Applications: Steel Spacer Stud with metric thread internal / external (range supplied without nut). For use in multi-level applications.
• Material: Machined Steel
• Surface: gloss zinc-plated

• Applications: Steel Spacer Stud with metric thread internal / external (range supplied without nut). For use in multi-level applications.
• Material: Machined Steel
• Surface: gloss zinc-plated
• 20mm Thread internal-external set of 4
• 10mm Thread internal-external set of 4
• 5mm Thread internal-internal set of 4

• 5 V power supplied by a USB connector 
• USB 2.0 full speed compatible interface 
• USB standard A to mini B cable 
• SWIM specific features
  - 1.65 V to 5.5 V application voltage supported on SWIM interface 
  - SWIM low-speed and high-speed modes supported
  - SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
  - SWIM cable for connection to the application via an ERNI standard vertical connector (ref: 284697 or 214017) or horizontal connector (ref: 214012)
  - SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector 
• JTAG/serial wire debugging (SWD) specific features 1.65 V to 3.6 V application voltage supported on the JTAG/SWD interface and 5 V tolerant inputs 
• JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector JTAG supported SWD and serial wire viewer (SWV) communication supported 
• Direct firmware update feature supported (DFU) 
• Status LED which blinks during communication with the PC 
• Operating temperature 0 to 50 °C

Specifications
• Dimension: 23*12.2*29mm
• Stall torque: 1.8kg/cm(4.8V)
• Operating speed: 0.1sec/60degree(4.8v)
• Operating voltage: 4.8V
• Work with 3.3VDC Supply also - by experiment
• Cord length 24.5cm
• Temperature range: 0℃ - 55℃
• Dead band width: 10us

Specification
1.4x20mm
2.4x20mm
1.8x20mm
#00x20mm
#0x20mm
#1x20mm

• Plug-In AC Adapters USA PLUG FOR ADAPTER

Features
1. UL NYLON66 Flame Class:94V-2 
2. Working Temperature:-20 to 120 degree 
3. RoHS